46 lines
2.2 KiB
Markdown
46 lines
2.2 KiB
Markdown
# Overview
|
|
|
|
Script to automate control of an home reverse cycle aircon system based on custom logic and temperature measurements.
|
|
|
|
This was originally written for an [AdvantageAir](https://www.advantageair.com.au/) system. It just calls an external script to interface with the aircon, so should be easily adaptable to other systems.
|
|
|
|
# Requirements
|
|
- [pymyair](https://github.com/smallsam/pymyair)
|
|
|
|
|
|
# Features
|
|
|
|
- Log temperature measurements to a CSV file or InfluxDB
|
|
- Control zone temperature by opening/closing its vents
|
|
- Control zone temperature by opening/closing vents in adjacent zones
|
|
- Automatically adjust aircon settings based on define temperature thresholds
|
|
- Turn zones on/off based on ARP table entires for specific MAC addresses
|
|
- Define temperature rules based on weekday and/or time
|
|
|
|
# Usage
|
|
|
|
root@gridbug:~# scripts/aircon.sh -h
|
|
usage: scripts/aircon.sh [options]
|
|
|
|
Modifies aircon based on configured parameters in /root/.airconrc.
|
|
|
|
-h Show this text.
|
|
-c Cron mode. Only show output if actions were taken.
|
|
-i x.x.x.x Specify IP address for aircon (default is 10.99.99.1)
|
|
-I db Log all zone temperatures to given influxdb database, then exit (see -o).
|
|
-A db Log actions to given influxdb database.
|
|
-f file Specify an alternate config file.
|
|
-k file If file exists, never change aircon settings (default: /root/.aircon_noaction).
|
|
-l num Set number of too hot/cold zones at which to taking action.
|
|
-L Log all zone temperatures to CSV file, then exit (see -o).
|
|
-o file Specify CSV output file. Default: /root/acstats.csv
|
|
-m Generate a config file based on current aircon setup.
|
|
-p Profiler mode.
|
|
-w List which zone owners' devices are available then exit.
|
|
-t num Specify degrees below min temperature before taking action.
|
|
-T num Specify degrees above max temperature before taking action.
|
|
-y Actually run commands/db inserts. By default, commands are just displayed.
|
|
|
|
|
|
|